Trang chủ / Dao khoan / High Performance Solid Carbide Drills / DAL Drills • CFRP-Ti-Stacks / B556A_DAL • ~3 x D

• 
• 

• B556A_DAL • ~3 x D

Solid Carbide Drills

DAL Drills • CFRP-Ti-Stacks • Through Coolant

 

Features and Benefits

• DAL Drills for Machining of CFRP-Metal Stack Materials.
• Material-specific SC Drill for combinations: CFRP-Ti-Al as well as CFRP-Ti, CFRP-Al, and also straight Ti or Al; with double-angle point design for burr-free exits when exiting metal side of stack.
• Sharp cutting edge to cleanly cut CFRPs as top layer in CFRP-metal stacks.
• The drill diameter is ground to a k6 tolerance and can achieve hole tolerances of H8.
• Excellent centring capabilities.

• Thông số kỹ thuật
• Comment

		D1 diameter
order number	short • KN15	mm	in	fraction	wire size	L	L3	L4 max	L5	LS	D
5420800	B556A04763DAL	4,763	.1875	3/16	—	66	28	20	0,8	36	6	Download CAD File
5420801	B556A04826DAL	4,826	.1900	—	—	66	28	20	0,9	36	6	Download CAD File
5420802	B556A06350DAL	6,350	.2500	1/4	E	79	34	24	1,1	36	8	Download CAD File
5420803	B556A06375DAL	6,375	.2510	—	—	79	34	24	1,1	36	8	Download CAD File
5420804	B556A07938DAL	7,938	.3125	5/16	—	79	41	29	1,4	36	8	Download CAD File
5420805	B556A09525DAL	9,525	.3750	3/8	—	89	47	35	1,7	40	10	Download CAD File
5420806	B556A11113DAL	11,113	.4375	7/16	—	102	55	40	2,0	45	12	Download CAD File
5420807	B556A12700DAL	12,700	.5000	1/2	—	107	60	43	2,3	45	14	Download CAD File
5420808	B556A14288DAL	14,288	.5625	9/16	—	115	65	45	2,5	48	16	Download CAD File
5420809	B556A15875DAL	15,875	.6250	5/8	—	115	65	45	2,8	48	16	Download CAD File